Products

ProfHolod modernized the modular solution from sandwich panels and swing-out single-leaf doors

13.02.2018

ProfHolod has perfected a modular solution from sandwich panels with a built-in swing-out single-leaf door, supplemented with an overhead frame that provides increased stiffness of the entire structure.
Installation of the door by a professional takes at least 3 hours, while a ready module can be mounted in 30-40 minutes.

The module consists of a split single-leaf door and a frame mounted in a wall sandwich panel with a framed light opening and shipped with one set. The module is used in the construction of refrigeration and freezing chambers from sandwich panels.

The module allows:

  1. Eliminate preparation errors when installing a door
  2. Save time for preparing a doorway
  3. Save time for framing the doorway
  4. Save money on installing the refrigeration door
  5. Obtain a general guarantee for an integral construction

    The design is made for two sizes of light apertures: width 800 or 900 mm and height up to 2200 mm. The length of the wall panel is determined by the height of the refrigerating chamber. The door frame is attached to the panel using a standard mounting kit: the Erickson nut, a metal stud, a thermowell and a thermo-mounter.

    The module is manufactured with two series of refrigeration doors:
    - F series with hinges, lock and handle of the French company Fermod (Fermod)
    - series & nbsp; R & nbsp; with hinges and a rotary handle of the German company Rahrbach (Reibach). Rahrbach locks provide a higher thermal insulation of the room due to a more compact pressing of the door leaf to the frame.

    Specialists of the department of technical solutions and new developments of ProfHoloda are ready to consult and provide technical support to construction companies that intend to use the module. To install it you need to accurately calculate all the parameters of the structure before the installation.

    ProfHolod creates unique knowledge-intensive solutions for heat management, so that professionals do not waste energy and energy.

    Взрыв-Схема-дверь-в-панели.jpg


    ProfHolod modernized the modular solution from sandwich panels and swing-out single-leaf doors

    ProfHolod has perfected a modular solution from sandwich panels with a built-in swing-out single-leaf door, supplemented with an overhead frame that provides increased stiffness of the entire structure.
    Installation of the door by a professional takes at least 3 hours, while a ready module can be mounted in 30-40 minutes.

    The module consists of a split single-leaf door and a frame mounted in a wall sandwich panel with a framed light opening and shipped with one set. The module is used in the construction of refrigeration and freezing chambers from sandwich panels.

    The module allows:

    1. Eliminate preparation errors when installing a door
    2. Save time for preparing a doorway
    3. Save time for framing the doorway
    4. Save money on installing the refrigeration door
    5. Obtain a general guarantee for an integral construction

      The design is made for two sizes of light apertures: width 800 or 900 mm and height up to 2200 mm. The length of the wall panel is determined by the height of the refrigerating chamber. The door frame is attached to the panel using a standard mounting kit: the Erickson nut, a metal stud, a thermowell and a thermo-mounter.

      The module is manufactured with two series of refrigeration doors:
      - F series with hinges, lock and handle of the French company Fermod (Fermod)
      - series & nbsp; R & nbsp; with hinges and a rotary handle of the German company Rahrbach (Reibach). Rahrbach locks provide a higher thermal insulation of the room due to a more compact pressing of the door leaf to the frame.

      Specialists of the department of technical solutions and new developments of ProfHoloda are ready to consult and provide technical support to construction companies that intend to use the module. To install it you need to accurately calculate all the parameters of the structure before the installation.

      ProfHolod creates unique knowledge-intensive solutions for heat management, so that professionals do not waste energy and energy.

      Взрыв-Схема-дверь-в-панели.jpg

Back to the list

Нам важно Ваше мнение

Заполнить анкету